Thanks mate.
Gold! Bought one today online, just to wait for it now. I'll also instal a battery charge Powerlet port and wire the forward USB plug while I have the bike dismantled.
Thank you again.
Ken
Thanks mate.
Gold! Bought one today online, just to wait for it now. I'll also instal a battery charge Powerlet port and wire the forward USB plug while I have the bike dismantled.
Thank you again.
Ken
2015 Blue F6B
Cairns AUSTRALIA
2015 Blue F6B
Cairns AUSTRALIA
Hi Ken,
Yes, I have had my bike out several times since installing the GiPro behind the speaker screen. The Red LED is visible through the screen; in bright sunlight. You can't miss it. You will see.
(If) you mount it behind the screen and later change your mind; there's enough cable (slack) where you can just pop off the instrument bevel cover and re-position the GiPro elsewhere; such as how HornBlower has done his; by adhering it to the inside of the upper right area of the left fork well (post #37 of this thread).
I also used 3m double sided tape; because the tape supplied with the GiPro didn't seem strong and/or thick enough.
21 years Army (retired)
...been everywhere, seen everything, done almost everything.
IBA 80537
Thanks for your assistance with this install Will.
I did everything as per your suggestions and diagrams.
Easy programming, and works flawlessly. Looks great in the left speaker pod, and not sticking out. Very easy to see and now I know what gear Im in.
All in all, a great mod.
Best wishes mate.
Ken
2015 Blue F6B
Cairns AUSTRALIA