Radio Channel Preset Control on Handlebars - Should have been there already

[98valk]

Hey Guys,
This probably won't interest many, but maybe some. I never liked having to reach down to change my preset channels, so I basically didn't.

So, I finally did something about it. I built a little circuit that will step from the first to the sixth channels. You could add one more output and have all 12 channels available. That is more than I need and a bit tedious to step through.

I found a place to cram a small push button switch on the handlebar. I like it.

I built two options. The first one is probably more dependable. Once it worked, I rebuilt it neater/cleaner and used a slightly different reset. Both work. Maybe someone like EC could mass produce these.

Anyway, here are some pics:

Attachment 13160
Preset channel control board

Attachment 13161
Handlebar push button

Attachment 13162
Where I tapped in for the presets - 12 pin connector

Attachment 13163
Schematic with two options

[srt8-in-largo]

I definitely have to do this... thanks!

[Steve 0080]

Amazing !!!!! Thanks for sharing !!!!!

[F6B1911]

I'll be by this weekend, you can install one on my bike!!

[Spanky]

All you engineers are putting us normal folks to shame!
still looking forward to SRT-8's TPMS system.

[srt8-in-largo]

All you engineers are putting us normal folks to shame!
still looking forward to SRT-8's TPMS system.

Sorry for taking so long... I've been temporarily "reassigned" to finish a bathroom grouting project, get a 300 foot row of board fencing stained and erected, and several spring time yard tasks

It's still on my radar...