Turn the knowb until you see 4 lines showing...that would be on the soft side....the more lines showing the more firm...
Turn the knowb until you see 4 lines showing...that would be on the soft side....the more lines showing the more firm...
" Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com
Okay, Brian, I see your point, I was calling it backwards from what it should be called. Yes, you are right that the highest setting, all the way counter-clockwise, is the softest setting, because...as you stated...we are getting the most dampening at the highest rate, and....the opposite end of the adjustment is the lowest dampening rate, which is the firmest...all the way clockwise. I believe that we all knew what was being said, it came down to a matter of semantics. But I do agree with what you said.
Here is my point...there is a problem with this adjuster. Period. No if's ands, or buts about it.
The majority of us are finding that we are only using the (highest) 5 to maybe 10 % of the adjustment range. There are a very few people that have found they can use much more of the adjustment range...and I would love to know the last 4 digits of their VIN's. I think that possibly Honda reealized they made a mistake somewhere along the production line, and they corrected this error, and finally sent out units with a pre-load adjuster that was corrct for this bike.
I find it very highly improbable that this is the correct pre-load adjuster, when my own bike is set at the maximum dampening rate...all the way counter-clockwise, and that anything more than 1 full rotation of the adjuster...2 clicks...is too firm for me, meaning the dampening rate is not enough, and the bike is WAY to harsh to ride. Okay, a very few people have found they can adjust theirs to the mid range or more on their adjusters, but when 93.14159% of us are using the highest settings...the 5 % to maybe 10% of the adjusters range...and that is it...then there is a problem.
Never thought about until you put it down, but your right. If we are only using the lower 10% the rest is wasted. It would have made more sense to install something that the base setting is in the middle or a little less.
Is this the same preloaded that is on a full wing with the added weight?
Any aftermarket items that could change this?
"Ride Shiny Side Up"
I cannot say with certainty that this is or is not the same, but the adjustment manner is completely different. On a GL-1800 Wing, you have two adjustment buttons, for a setting # 1, and a setting # 2. When you choose to adjust either of these setting, for example, setting # 1...you push that button for a moment, then push the up or down buttons to electrically adjust the rear shock pre-load. The range on that is 0 to 30. On all 3 of my previous full sized Wings, I always used a setting of 13 for a solo rider...setting # 1...and a setting of 22 for a heavier load...setting # 2.
And that is my point. On a full sized Wing, with a range of 0 to 30...I would use a setting of 13 as a solo rider, wanting to ride a sport mode bike.
On this F6B, with a range of 0 to 38 clicks...or 0 to 19 full turns of ther manual adjuster...I am set at 0...zero. I am set at the softest possible setting that can be made, and anything firmer is too firm for me. And...I ride the bike like it is a CBR600RR.
Whether Honda is using the same adjuster or not...and if they are...does it make a difference that the F6B uses a manual adjuster, whereas the full sized wing uses an electric adjuster...I do not know.
What I do know, is that there is a problem with these adjusters.