I purchased the Baggershield 11" Tinted , not sure if I'm missing rubber gromets or not? Went to install today and only has a rubber grommet for the center mount.
Mounted it and seems wavy , cannot find any details on their Website. I know Stroguy has the same shield and hope that he or someone chimes in on this Thanks. ** see picts
Attachment 14634Attachment 14635Attachment 14636
2015 Matte Silver F6B (Current Bike)
2011 Yamaha Stryker Copper Red (Wife's Current Bike)
2011 Yamaha Stryker Impact Blue (Traded in for F6B)
1997 Yamaha YZF 1000 (1997-2015 - sold recently)
1995 Yamaha YZF 600 (1995-1997)
1984 Yamaha FJ 600 (1984-1993)
1981 Suzuki GS 450 E (1983-1984)
I come from the Sport Bike World. The things I used to blow by, I now cruise by and enjoy......
I think I remember 3. That loks like it's molded bad. But I am on my phone and can't see it very well. Be home in a few hours but surely someone else has an input.
[SIGPIC][/SIGPIC]
2015 F6B Deluxe
Matte Silver
Looks OK to me.... the 15's must come with this washer...mine did not...I did have plastcic washers on my 13... I don't see an issue...I will say the bolts need to be tight but not to the point of indenting the shield...hope this helps...
" Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com
Originally Posted by stroguy
THanks - my gut tells me it should have 3 gromets. the middle nice and firm and both the sides feel loose when tightened down and can move slightly. Off to the hardware store now.
I may be too critical on the wavy part - probably o.k.
2015 Matte Silver F6B (Current Bike)
2011 Yamaha Stryker Copper Red (Wife's Current Bike)
2011 Yamaha Stryker Impact Blue (Traded in for F6B)
1997 Yamaha YZF 1000 (1997-2015 - sold recently)
1995 Yamaha YZF 600 (1995-1997)
1984 Yamaha FJ 600 (1984-1993)
1981 Suzuki GS 450 E (1983-1984)
I come from the Sport Bike World. The things I used to blow by, I now cruise by and enjoy......
Sorry, double posted.
[SIGPIC][/SIGPIC]
2015 F6B Deluxe
Matte Silver
I've never seen a rubber grommet used that way on the F6B. I believe it goes underneath the shield. Is there one there? Mine fell out every time I swapped shields so I glued it down.
Maybe the piece I'm talking about fell out of yours. It goes around the mounting hole on the bike to support the back of the shield.
Not sure which shield it was, I have had so many...I use metal washers on my bike !!! Bobby is right...on the 13's at least there was a rubber washer that kept falling off on mine !!!!
" Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com
If I remember correctly, my standard shield (albeit it was a tall Honda OEM) was mounted at both outside attachment points only - nothing on the center hole. I reused the 2 OEM mounts and 1 from Baggershield so that the BS had 3 mounts.
Just push with your finger on the bottom of the rubber weatherstrip upwards, until it mates with the windshield. Not unusual at all. I've had to do that on every windscreen I've put on .
Posting Permissions
Reply With Quote