CBs and Cell phones questions

[terryboyle]

nvmyf6

The Midland CB is not Bluetooth ready by itself, it would use a wire plug and plug into the Sena SR10 bluetooth hub, this plug is sold by Sena as well. There is a button on this hub that you pressed, that activates the CBs mike. But there is also a wired plug button that could be used as well. so this hub can be hidden in the cubby. It would be just the Midland CB that would be attached to the handle bars, along with the Mike activation button.

Sena SR10 Bluetooth unit.

http://www.revzilla.com/motorcycle/s...-radio-adapter

Midland handheld CB radio

http://www.amazon.com/Midland-75-822.../dp/B00000K2YR

With this set up, I would be able to use the Bluetooth headset that I already have installed in my helmet.

The other CB option is the BikeMP3 CB unit that would be installed under the seat I believe. then purchasing the F6B CB enable kit. with a wired headset. I just don't know how I would be able to use my cell phone.

Would you know if this would work with the Uclear HBC200?
Thank you
Terry

[nvmyf6]

nvmyf6


Would you know if this would work with the Uclear HBC200?
Thank you
Terry

Hey Terry, that is a good question Sir,

No, I do not know if this setup will work with the Uclear HBC200. I ended up going a different route. I installed a Honda factory CB. I wired it up my self. A very easy project.

Here is the link to my install. Unfortunately the pictures are no longer available to see in the link. As far as the head set that I use, its just a normal headset, that plugs into the 5 pin connector, I purchased from WingStuff along with the CB and some of the other components I needed to complete the install.

http://hondaf6b.com/showthread.php?7...io-suggestions

Ride Safe