backrest
Results 1 to 6 of 6

Thread: backrest

  1. #1
    Junior Member
    Join Date
    Jul 2013
    Posts
    15

    backrest

    is there an adjustable backrest riser available from stock height to lets say 4-5 inches higher thanks

  2. #2
    DarkSider#1617 Steve 0080's Avatar
    Join Date
    Dec 2012
    Location
    Sanford,FLA
    Posts
    8,079

    Cool

    Yes, I have two more available.....I have the next 30 being built now, pick them up next Thur, go to Sand blaster, then to powder coating....then back on E Bay.......if yuou want one now......pm me your address .....and I will send you an address to send a check.....


    http://hondaf6b.com/showthread.php?5...or-F6B-on-EBay
    " Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com

  3. #3
    Junior Member
    Join Date
    Jul 2013
    Posts
    15
    are they adjustable for the height thanks

  4. #4
    DarkSider#1617 Steve 0080's Avatar
    Join Date
    Dec 2012
    Location
    Sanford,FLA
    Posts
    8,079
    No...the back rest that is currently available only raises the butt chock 4 inches... there was a prototype posted a couple week ago that if it come on the market may be adjustable but only for up and down... I am having one made next week as a special order that will bring the butt chock up 4" and forward 5"...this one will be one off and I have permission from the buyer to smoke off his credit card... When all this started I wanted to do a adjustable unit but it just became to cost preventive,,,,,preventative to the point one could not sell them, to expensive !

    Here are a couple of pics of what I have....if you can come up with exactly what you want, I can get it made for you, but it will be exspensive!
    Attached Images Attached Images
    " Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com

  5. #5
    Junior Member
    Join Date
    Jul 2013
    Posts
    15
    how expensive do you mean

  6. #6
    DarkSider#1617 Steve 0080's Avatar
    Join Date
    Dec 2012
    Location
    Sanford,FLA
    Posts
    8,079
    depends on how and what you want to accomplish....the one I am doing next week is really no big deal, just a one off.... Be aware, I am not doing the work...I draw up the plans and summit them to a machinist who in turn makes the item and hands me a bill. I will not know what the bill is until it is handed to me... If you know a machinist in your town go by and visit and see what they have to say for your ideal...hope this helps...steve FYI...normally the steps are, get the item made, take to a sand blaster, hurry, then to a powder coater...once it is sand blasted, do not touch the item with your bear hands...
    " Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •