Fog light wiring terminal location?

[Baytown]

G'Day fellas.
Thanks for that info. It was driving me mad looking for the connectors!
Bugger.
I'll do the search you suggested Woody and place the link here for any other Aussie spec bike owners that may wish to do this mod. Wish someone sold a wiring loom for this issue.
Ive contacted Chris (Cosborn) as suggested FLA thanks mate and hopefully he will have some info on the matter.
Best wishes and thanks again fellas.
Ken

[grendl]

For the switch block I don't know for the Aussie models since you don't have the harness for lights where they are for US models. I installed EC fog lights and was having problems finding the switch connector. Where I did eventually find it was below and to the right of the radio and tucked in close.Initially all I could see was a black wiring harness but looking down into the cavity there is a white plastic guard with the wires held in place with a zip tie. I undid the zip lock and tugged gently on the harness and found an open black connector inside the white guard.It fits the switch connector with no problem. Again not sure of your wiring but mine was hidden pretty good.
Once I got things hooked up and tested I put it back which took a little messing around with the extra wire -even put the tie back to hold things in place.
Good Luck !

[Baytown]

Thanks Grendle.
I did use the connector in that location for the switch, which is now illuminated at least. It only had two wires populated in stead of the four in the on off switch, so Ill get the multimeter out to see what it does.
I went to Ebay Oz and purchased a heavy duty driving light wiring harness so will run that from the fuse panel and on off switch once it arrives.
I'll get there eventually.
Now to fit the led relay upgrade ( looking forward to that like a dose of warts!) and the Kuryarkyn tail led assembly.
Best wishes fellas.
Ken

[woody]

Sounds like you're on the right track Ken. The Hella spot and fog light wiring diagram's aren't solely for the F6B they were a general use tool that I found very helpful. For instance here in Queensland SPOT lights must run through your dimmer switch whereas FOG lights do not.

I also ran mine through a Relay they are simple to install and once again the Hella relay came with it's own diagram.



Cheers Woody