Awesome!!! How do you replace them? Or, do you just use the double sided tape directly over the Goldwing emblem? And also, can you link to your ebay listing?
Edit: here's the link to the two items: http://www.ebay.com/sch/ladylyn10/m....&_trksid=p3686
One more edit: Are you the same person who was working on the plates like these for the front fender reflectors?
You have to remove the old emblem and replace with a new one with the tape that we provide.
Looks like someone posted the link.
We have been working on these emblems since March, way before the other guy. Wait till you see what else we have come up with. More to come.
Personalized emblems will be available soon. What sort of sayings would all of you like engraved on your emblems ??? Just remember, The more letters there are the smaller they will get. It would be best to stay with six letters or less. And there is the possibility of two lines.
How are you removing the Goldwing emblem, though? Just pry it up with a flathead screwdriver?
VERY CAREFULLY WITH TWO SMALL SCREWDRIVERS, ONE ON EACH END APPLY STEADY PRESSURE TO PRY IT OFF. DO NOT FORCE !! USE STEADY PRESSURE AND IT WILL EVENTUALLY GIVE WAY. YOU MIGHT WANT TO STICK SOME CARDBOARD BEHIND THE SCREWDRIVERS SO YOU DON'T END UP WITH PRY MARKS IN THE PLASTIC. THEN JUST SCAPE AWAY THE OLD TAPE AND USE SOME GOOGONE TO GET GET RID OF THE STICKY MESS.
Are you also working on badges to replace reflectors on front fender and saddlebags?
I wasn't planning on it but never say never. First of all there would be a safety issue involved with replacing those reflectors. But it is your
F6B and you can do what you like to your own motorcycle. What would you like to see on the emblems for the reflectors?
What I was planning on was to see how quickly we could turn over personalized emblems for the members of this board. And I would like to see what you guys want the script to say so I can make up some samples. Maybe some would like to see the same thing as their personalized License plate. Bring it on.
Edit: here's the link to the two items: http://www.ebay.com/sch/ladylyn10/m....&_trksid=p3686
Very cool, just ordered one on ebay.
ss^,
Ken
nmred.jpgIMG_0304.jpg
Contact me if interested, can be done on stainless or anodized metals also.