How are you removing the Goldwing emblem, though? Just pry it up with a flathead screwdriver?
How are you removing the Goldwing emblem, though? Just pry it up with a flathead screwdriver?
VERY CAREFULLY WITH TWO SMALL SCREWDRIVERS, ONE ON EACH END APPLY STEADY PRESSURE TO PRY IT OFF. DO NOT FORCE !! USE STEADY PRESSURE AND IT WILL EVENTUALLY GIVE WAY. YOU MIGHT WANT TO STICK SOME CARDBOARD BEHIND THE SCREWDRIVERS SO YOU DON'T END UP WITH PRY MARKS IN THE PLASTIC. THEN JUST SCAPE AWAY THE OLD TAPE AND USE SOME GOOGONE TO GET GET RID OF THE STICKY MESS.
Are you also working on badges to replace reflectors on front fender and saddlebags?
I wasn't planning on it but never say never. First of all there would be a safety issue involved with replacing those reflectors. But it is your
F6B and you can do what you like to your own motorcycle. What would you like to see on the emblems for the reflectors?
What I was planning on was to see how quickly we could turn over personalized emblems for the members of this board. And I would like to see what you guys want the script to say so I can make up some samples. Maybe some would like to see the same thing as their personalized License plate. Bring it on.
I am interested in whole set of badges, that way it would look like it came that way. For design of badges over reflectors, how about:
- Honda Wing with words 'F6B' underneath instead of 'Honda'?
- or the whole eagle with 'F6B' underneath instead of 'Goldwing'?
- or just simply 'F6B', like you have it already.
- maybe a new eagle head logo with 'F6B' instead of 'Eagle'
- how about a Punisher Skull logo with 'F6B' under it.
Well, some stuff that comes to mind to make my black F even more sinister.
Pictures included. Black anodized, of course.
Another good one for me for front reflectors replacement. Fill in empty areas between lines with 'F' in upper left, '6' in upper right and 'B' in lower middle empty area. Use military type font.
How about BATMAN signal
" Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com
Lol this is funny. This guy is wanting to charge us $30 for under $5 in material and manufacturing cost. The stock is pre plated .04 thick aluminum with a logo etched in it. I guess we're going to pay for the 2 months of R&D work they put into it.
Come on Dude your part looks really good but stop trying to rip off fellow F6B riders trying to make there bikes look unique.
Oh. By the way I'm "THE OTHER GUY"
You guys want some custom stuff done I'll work with you.
Have the front and rear reflectos done the bags are a little different size and on a angle.
I'll try to get them done this week.
Punisher logo is a definite go that would be badass on the side where the honda logo is.