Flashing brake lights

[SierraKen]

Ordered mine. Hope to receive next week. Many thanks for your original post.

[six2go]

https://www.superbrightleds.com/more...Specifications.

Took 5 mins to install. Pull the trim off that sits above the light panel (not sure that you even need to do that). Remove the two 10mm nuts inside both bags to remove the light panel. Pull the wire harness off and rotate the bulb carrier to the left about 1/4 turn to remove. Running lights are brighter than factory and lights flash 3 times each time the brakes are engaged.

Hey David, I hope it's as easy as you say. I just placed my order and should have them by the middle of the week. I'm not afraid to use a wrench, but the plastic covers on this bike just scare the sh!t outa me.

[stroguy]

Don't be scared, they pop of easy. One beer, one wrench and 20 minutes......done.

[wjduke]

I'm no mechanic and managed it just fine. Don't over tighten when putting back together. Snug on the inside nut. I over did one just a little....no harm done, but thought I'd mention it.

[Chuckv]

https://www.superbrightleds.com/more...Specifications.

Took 5 mins to install. Pull the trim off that sits above the light panel (not sure that you even need to do that). Remove the two 10mm nuts inside both bags to remove the light panel. Pull the wire harness off and rotate the bulb carrier to the left about 1/4 turn to remove. Running lights are brighter than factory and lights flash 3 times each time the brakes are engaged.

Where did you get the LED bulbs, and what is the number for them? Thanks Chuck.

[53driver]

Are you guys looking at a GL or F6 tail light ? I am thinking there are only two acorn nuts that are removed...

F6B has 4 nuts, 2 inside each saddlebag....

My memory is fading very fast !!!!!

Florida GLs have three nuts.....one in each pannier and one in the seat...

[Vondawg]

For a reminder, just think of male Siamese twins......

[stevenolts]

loydmoore1,

I don't see these on Amazon?

Steve

[lloydmoore1]

Steve
Sorry it was ebay. Just type this number into the search
331274100022

http://www.ebay.com/sch/i.html?_from...00022&_sacat=0


Lloyd

[Circle-5]

https://www.superbrightleds.com/more...Specifications.

Took 5 mins to install. Pull the trim off that sits above the light panel (not sure that you even need to do that). Remove the two 10mm nuts inside both bags to remove the light panel. Pull the wire harness off and rotate the bulb carrier to the left about 1/4 turn to remove. [...]

I removed the two 10mm nuts inside the bags, and ... the light bar didn't even move! So I looked up the 2013 parts view, and sure enough, my "combination light" has 4 nuts instead of 2 (see part #18 in attachment). The other 2 nuts are not easily accessible -- not sure how to reach them and how much plastic I'll have to take out. But I suspect it will take more than 5 mins!

Attachment 21982