I'll take it no interest here, I'll not put much more time into it.

I do have a question, I'm using the power from the oem amp relay for the accessory on. If i leave the key on acc or on, as in getting ready, 1 out of 100 times i go to start the bike, i get a pulse of noise through the system. The easy fix is turn off the bike for a half second before starting, but would love to eliminate this. I suspect since the power lead is of the relay, the cycle time of the relay comes into play.

I'm going to try another acc switched source.

Other thoughts or suggestions?

I have timing options on the unit to play with as well.

Thanx all,
Robert