White or Amber LED Light Rings

[RickW]

We were able to get some Rings at reduced pricing and are passing along the savings.
This is one of our most popular items for the F6B and GoldWing.
Amber: $59.95, White: $69.95 (while supplies last)

White or Amber LED Light Rings, GL1800 Gold Wing 12+ / F6B (pr)

Add some functional flair to the front sides of your Gold Wing or F6B.
Includes LED Rings for both sides.

The brightest LED Rings you will find for your GL1800 or F6B.
Each Custom LED Ring is packed with 93 nano size LED’s. These are as bright as Daytime Running Lights.

Mounted around the Gold Wing Logos with 3M installed Tape.

[Jimmytee]

I like my white ones. Get comments all the time. I made covers that I adhered to the rings to cover the direct light because they are so bright. The effect was to use the rings to illuminate the custom Hambly badges . Works great.

12038216_971879809520440_5523665285492053857_n.jpg

[stroguy]

Jimmy? Did you mount the rings behind the Hambly? I have the Hamblys' and am thinking of this. Got a pic of it off?

[Jimmytee]

Jimmy? Did you mount the rings behind the Hambly? I have the Hamblys' and am thinking of this. Got a pic of it off?

I used those plastic suction cup mounting discs. They come in different sizes, but the ones I have are 79.98 mm. They measured 3.149" with my calipers. I had a couple laying around. I used a hole saw to cut out the inside diameter leaving a ring. I just measured the inside diameter I cut with the hole saw and it measures at 2.44". Simply take the disc and secure it to a block of wood with a couple screws on the soon to be discarded center area and slowly cut with a hole saw. Drill holes in the places you are putting the screw so you don't risk splitting the plastic by driving screws through it. The screws are just to hold the piece while you use the hole saw. I used a file to smooth out any rough ridges in the plastic from the cut.

I secured them to the top surface of the light rings with black RTV sealant. It's been over a year and still good.

Here are some 80 mmm discs I found quickly on Amazon.
https://www.amazon.com/Arkon-Adhesiv...ion+mount+disc

[Old Ryder]

On the B, you can never have too many lights---as long as they don't look tacky. Thanks Rick. Just ordered mine.

[Steve 0080]

Get the ones that blink with the turn signals...very nice !!!

[Jimmytee]

We were able to get some Rings at reduced pricing and are passing along the savings.
This is one of our most popular items for the F6B and GoldWing.

Hey Rick, sent you a PM. Was wanting to know if you have the Pathfinder LEDs in stock and whether I could get those shipped to me by Thursday?

[RickW]

Hey Rick, sent you a PM. Was wanting to know if you have the Pathfinder LEDs in stock and whether I could get those shipped to me by Thursday?

I answered your PM. We do have the Pathfinder Headlight LED's in stock and can ship immediately. Everything out tomorrow on Monday is FedEx or UPS though because of the Gov't holiday.
I installed the Pathfinders on my own F6B. Besides putting out an impressive amount of light they match all the other LED lighting on the bike including the White Rings.

http://store.valueaccessories.net/Pa...itsGL1800.aspx

[stroguy]

Love the fogs. Do you have them switched or do they come on with the engine on like the low beams?

[RickW]

Love the fogs. Do you have them switched or do they come on with the engine on like the low beams?

They are on all the time, but you can switch them off also.