Motorcycle Covers

[pblair]

Geza made this based on my description of the replacement windshield. I would say they did a pretty good job. I have since poked a hole for the antennae. The material will not rip, so the hole is not expanding. You really do get what you pay for, this cover is excellent.

IMG_1589.jpgIMG_1590.jpg

[MercuryF1]

Geza made this based on my description of the replacement windshield.

Attachment 171Attachment 172

I ordered the Geza cover whilst waiting for delivery of my bike. At that time, I didn't think about replacement windscreen
Now that I have a baggershield installed, I just realised the cover isn't going to fit my bike.

(Geza Cover is on the way to me now by post) This has totally wrecked my day!

[Darkknight]

My Geza cover has some extra room in the shield area. I am running the stock stubby shield. I bet that I could squeeze a 4-6 inch taller shield under that with no problem. The material is quite stretchy. Don't panic yet. It might be OK.

[MercuryF1]

My Geza cover has some extra room in the shield area. I am running the stock stubby shield. I bet that I could squeeze a 4-6 inch taller shield under that with no problem. The material is quite stretchy. Don't panic yet. It might be OK.

Fingera crossed but I just measured the height of the Baggershield- it's a good 12 inches from the base! Was about to re-order another cover but decided to wait a little. Perhaps cheaper to change a shorter shield?

[BillyDaFinn]

My Geza cover has some extra room in the shield area. I am running the stock stubby shield. I bet that I could squeeze a 4-6 inch taller shield under that with no problem. The material is quite stretchy. Don't panic yet. It might be OK.

Darknight, I'm curious which model of cover is shown in your photos? Is that 3/4 cover? I'm also thinking about ordering one. Thanks......

[Darkknight]

They called it a half cover. Their "full" cover would go over the front fender. Since I may tow it occaisionally, I went with the "pro plus" material.

I'm considering a taller shield.... I think there is enough material and stretch in my current cover to accomodate a moderate increase of shield height.

If I pull the trigger on a new one (shield) I'll post a review and pictures.

[BillyDaFinn]

They called it a half cover. Their "full" cover would go over the front fender. Since I may tow it occaisionally, I went with the "pro plus" material.

I'm considering a taller shield.... I think there is enough material and stretch in my current cover to accomodate a moderate increase of shield height.

If I pull the trigger on a new one (shield) I'll post a review and pictures.

Thanks for the info., I'll be ordering one of these later in the week.

[Darkknight]

I've installed the baggershield 11" sport dark tinted windshield and there is still room with the Geza cover. They must have known that we'd change the windshield.
There are pictures on other threads of my setup under "Windshields" or "I may go bigger".