I have a knock off Rear Carrier rack and I'm looking for the right collars (long and short) that will fit the rack. Looks like the OEM version comes with a set. Is there anyway that I can get these aftermarket?
I have a knock off Rear Carrier rack and I'm looking for the right collars (long and short) that will fit the rack. Looks like the OEM version comes with a set. Is there anyway that I can get these aftermarket?
Try Ace.
You might have to cut them to size and paint.
4 Wheels Move the Body
2 Wheels Move the Soul
In Loving Memory of My Brother
"Death Waits In The Dark"
2013 F6B Deluxe
Successful people build each other up. They motivate, inspire and push each other. Unsuccessful people just hate, blame and complain.
Anybody know the depth of those, long and short?
Info on the barrel lengths can be found in this post!
http://hondaf6b.com/showthread.php?4...d-Luggage-Rack
Just looked at your thread, like what you had made. Seen it at The RTE at Cody's. I forgot to ask where did you get the solid black material for the larger one? I think I might be able to use my collars that came with the Honda Rack. I thinking about putting a small type box similar to the GiVi Box with a subwoofer in a seal box inside, just not sure of the weight or weight span of the/a cutting board strength. thanks Papa Tater
2015 Matte Silver F6B (Current Bike)
2011 Yamaha Stryker Copper Red (Wife's Current Bike)
2011 Yamaha Stryker Impact Blue (Traded in for F6B)
1997 Yamaha YZF 1000 (1997-2015 - sold recently)
1995 Yamaha YZF 600 (1995-1997)
1984 Yamaha FJ 600 (1984-1993)
1981 Suzuki GS 450 E (1983-1984)
I come from the Sport Bike World. The things I used to blow by, I now cruise by and enjoy......
I just got some black anodized spacers from these people.
http://aluminumspacers.com/
"Go sell crazy somewhere else, we're all stocked up"
I bought the Twisted Throttle Givi rack to be able to use a top case. I didn't like how the rack sat too high at the back and too far from the bike. I used stacks of washers instead of the spacers in the kit and removed some washers until I found the right distance and slope. Then I cut the spacers from the kit to the right measurements and I got the exact results I wanted. I could have left the washers but since I had the black spacers I used those. Now the rack slightly slopes down in the same direction as the bike's tail.
The black commercial grade vinyl was acquired from a friend who manufactures it. You could possibly buy it on-line. I was fortunate enough to get two blanks free The vinyl is extremely rigid and can hold considerable weight i.e. my loaded golf bag for example
DSC_0006.jpgDSC_0005.jpg
Thanks and that will give me a start for my project.
2015 Matte Silver F6B (Current Bike)
2011 Yamaha Stryker Copper Red (Wife's Current Bike)
2011 Yamaha Stryker Impact Blue (Traded in for F6B)
1997 Yamaha YZF 1000 (1997-2015 - sold recently)
1995 Yamaha YZF 600 (1995-1997)
1984 Yamaha FJ 600 (1984-1993)
1981 Suzuki GS 450 E (1983-1984)
I come from the Sport Bike World. The things I used to blow by, I now cruise by and enjoy......