looking to cut down some extra keys and add a black turn knob to the top of the key...what has been done or maybe a place to start looking..
tired of always puling out 1 key every time i stop
thanks mark
looking to cut down some extra keys and add a black turn knob to the top of the key...what has been done or maybe a place to start looking..
tired of always puling out 1 key every time i stop
thanks mark
YouTube it. Easy Peary.
Peasy.
They are very handy. I have one for the saddlebag lock and one for the glove box that I also pull and use for the gas lid. I used a Dremmel to cut the keys the right length (glove box key is shorter) and then to cut a slot in the knob for the key to fit tightly. Filled that whole part of the knob with epoxy. Let it cure completely and it is solid as a rock.
https://m.youtube.com/watch?v=CUJ48PtQgik
I have knob keys on fuel door and top compartment. My challenge is getting the correct length on the saddlebag lock. the fuel door & top compartment key knobs are too short, and the one I have in the saddlebag lock sticks out too far (for me). Any tips for cutting the saddlebag key length? BTW, kudos to whoever came us with this approach!
got it......
thank you
I have a few of em on my BikeIMG_0634.JPGIMG_0633 - Copy.JPG
I was born with nothing and shore got a heap of it left
From Lowes a 27R key does not have to be cut down and will operate the fuel door, cubby and saddlebag locks. It will not operate the ignition and is inexpensive.