Travelor, do you have the B with the heated grips? If so, do you have ISO grips?
I have not used the MC Cruise, but I have installed three of the Rostras (One on my F6b, one on my R1200GSA, and helped scottydi put one on his F6b). For around $200, they're hard to beat. On the F6b, I did splurge on the OEM 2015 right grip controls so that I could have factory buttons, so that added a bit more to the $200 though.
That a lot cheaper than MC Cruise with dollar exchange rate they are about $750. for everything.
There is an excellent write-up on our sister forum for the Valkyries that was super-helpful. Hopefully no one minds me posting it here for folks to refer to. If it's an issue, by the way, let me know and I'll remove the link...
https://www.f6cforum.com/forum/12-ho...l-my-bike.html
I also learned a few things along the way as well. If anyone else is working on the project, I'm happy to help any way I can.
I have an Atlas throttle lock and it works like great. I have heated grips. The wire comes out of the bottom of the grip so I went with a top mount. I really like it and have no issues with it yet.
IMG_3254.jpg
The stoichiometric mixture for a gasoline engine is the ideal ratio of air to fuel that burns all fuel with no excess air. For gasoline fuel, thestoichiometric air–fuel mixture is about 14.7:1 i.e. for every one gram of fuel, 14.7 grams of air are required. - Wiki