Gotcha, will reduce the psi.Originally Posted by willtill
Very good.
It should not take a lot more PSI... the run flats have stiffer sidewalls so if you put too much air pressure in them, the sidewall will not deform correctly during a lean of the bike into a corner. The mushiness you feel is the sidewall deforming to keep more tread on the pavement. You will get used to this sensation and it will not be noticeable later on.
Watch the rub marks on the side of the tread. If it looks like you are rubbing on the area above the edge of the tread, reduce that PSI a bit.
I'll run out in a bit and take a pic of my CT's run flat tread edge to show you what I'm talking about, once this damned rain stops.
On edit: 28PSI
Reply With Quote