I've been offered a pair if passenger floorboards from a 1990 Goldwing.
Is anyone aware if these will fit the F6B
Cheers and thanks
Chris
Attachment 11284Attachment 11285
I've been offered a pair if passenger floorboards from a 1990 Goldwing.
Is anyone aware if these will fit the F6B
Cheers and thanks
Chris
Attachment 11284Attachment 11285
It looks like the mounting brackets are different than the 2013-2014 OEM brackets, may take some modification??
Attachment 11286
Hi Chris
Don't think the GL1500 ones will fit, but any GL1800 should.
Cheers
Ron
Cheers Guys, took a bit of a fancy to yours yesterday Ron, anything to ease the ride for the other half, simple life etc. By the way Ron, thanks for joining us it was a good little ride.
Chris
Attachment 11296
Rivco Product has all of your passenger and driver floor board needs
http://www.rivcoproducts.com/product...&cat=441&page=
If you need anything please contact me
James (LUMPY) Gentry
Technical Sales Advisor
Rivco Products,Inc
(888)-801-8222
No, but you can make anything fit if ya throw enough $ at it.
Attachment 11301
Blown VTX1800
The guy who invented the first wheel was an idiot -
the guy who invented the second one... he was the genius!
http://theringfinders.com/blog/Larry.Royal/
Not mine, belongs to a friend. I only build turbo VTX1800
Attachment 11306
Attachment 11307
Attachment 11308
The guy who invented the first wheel was an idiot -
the guy who invented the second one... he was the genius!
http://theringfinders.com/blog/Larry.Royal/
Thanks guys I now know where I'm coming from........I hope
Chris
I've tried the 1990 passenger floorboards and they fit with the following criteria.
1. Need a small flat washer on the inside of the bolt head, (no surprises there)
2. Use the two original foot rest bolts
3. Use 2 flat washes on each bolt, between the mount of the footrest and the bike, simply to keep the screw that holds the flat spring (holding open device)....there's the Army side of me again..... from touching the bike.
Works well
Cheers Chris