Bit of info regarding Passenger floorboards please

[cosborn]

I've been offered a pair if passenger floorboards from a 1990 Goldwing.
Is anyone aware if these will fit the F6B

Cheers and thanks

Chris


Attachment 11284Attachment 11285

[F6B1911]

It looks like the mounting brackets are different than the 2013-2014 OEM brackets, may take some modification??


Attachment 11286

[Vudu_52]

Hi Chris

Don't think the GL1500 ones will fit, but any GL1800 should.

Cheers
Ron

[cosborn]

Cheers Guys, took a bit of a fancy to yours yesterday Ron, anything to ease the ride for the other half, simple life etc. By the way Ron, thanks for joining us it was a good little ride.

Chris



Attachment 11296

[Design@Rivco]

Rivco Product has all of your passenger and driver floor board needs

http://www.rivcoproducts.com/product...&cat=441&page=

If you need anything please contact me

James (LUMPY) Gentry
Technical Sales Advisor
Rivco Products,Inc
(888)-801-8222

[BIGLRY]

I've been offered a pair if passenger floorboards from a 1990 Goldwing.
Is anyone aware if these will fit the F6B

Cheers and thanks

Chris


Attachment 11284Attachment 11285

No, but you can make anything fit if ya throw enough $ at it.
Attachment 11301
Blown VTX1800

[Big Jay]

That is an awesome VTX there BIGLRY

[BIGLRY]

That is an awesome VTX there BIGLRY

Not mine, belongs to a friend. I only build turbo VTX1800
Attachment 11306
Attachment 11307
Attachment 11308

[cosborn]

Thanks guys I now know where I'm coming from........I hope

Chris

[cosborn]

I've tried the 1990 passenger floorboards and they fit with the following criteria.
1. Need a small flat washer on the inside of the bolt head, (no surprises there)
2. Use the two original foot rest bolts
3. Use 2 flat washes on each bolt, between the mount of the footrest and the bike, simply to keep the screw that holds the flat spring (holding open device)....there's the Army side of me again..... from touching the bike.

Works well

Cheers Chris