rear wheel

[shooter]

I bought a new takeoff wheel from HOR off a full wing according to the parts guy that was exactly like ours right down to the color. So don't tell me it can't happen. $225 plus $20 shipping. No the spokes aren't filled I'm George it is exactly like ours. I have a General G Max on it. Only difference is the TPM.

[BIGLRY]

Now ya all got me thinking...........
The Rune runs a Front: 150/60R-18 and a Rear: 180/55R-17
While the F6B runs a Front: 130/70R-18 and a Rear: 180/60R-16
I have a few extra Rune wheels.
I also have a new Rune Hub, Knock-off Spinner & Batman Spinner like the ones below.
Attachment 14812
Below is a chrome rear Rune wheel with the OEM Rune hub cover, I have one set in powder coated black.
Attachment 14811
I know they will fit the F6B rear dif, Now I have to to check the caliper/rotor line up and the front axel spacers if I want to swap....hummmmmmmmm(I'm betting they'll fit with a little mod)

[Bryster]

Now ya all got me thinking...........
The Rune runs a Front: 150/60R-18 and a Rear: 180/55R-17
While the F6B runs a Front: 130/70R-18 and a Rear: 180/60R-16
I have a few extra Rune wheels.
I also have a new Rune Hub, Knock-off Spinner & Batman Spinner like the ones below.
Attachment 14812
Below is a chrome rear Rune wheel with the OEM Rune hub cover, I have one set in powder coated black.
Attachment 14811
I know they will fit the F6B rear dif, Now I have to to check the caliper/rotor line up and the front axel spacers if I want to swap....hummmmmmmmm(I'm betting they'll fit with a little mod)

*scratches head* Like your thinking, but it'd be like putting art in a room with no doors.... Can't see the rear wheel.....

[BIGLRY]

*scratches head* Like your thinking, but it'd be like putting art in a room with no doors.... Can't see the rear wheel.....

Heh heh... not the first time I installed something on a scoot ya could not see.
I was mainly thinking about changing the height of the F6B by swapping the F6B's 180/60R-16 rear for the Rune's lower profile, but bigger rear 180/55R-17 and leaving the OEM F6B front on and just doing a gloss black powder coat to match the Rune's rear.
Below is the OEM Rune rear wheel and rubber with the knockoff spinner in black powder coat I'm thinking about using.
Attachment 14821
Attachment 14822

[Madmax]

I know 2012 and up are the same on the f6b and full wing , below that there is a different part number and price .

[yellow rex]

The wheel is different in the valve stem area that's the difference.