Quote Originally Posted by SoCal Rich View Post
Amp is in the right compartment, easy to get cable to. So, I could just clip the four pre out wires from the audio unit and connect them to 2 RCAs, correct? Seems easier to get to the audio unit than the original amp to grab those four wires.
Finally got it done! Removed the seat, opened the head unit box. Located the four wires coming out of the head unit (attached to the lower left side plug going into the head unit) and cut them and soldered the leads from the two RCAs so that the RCA plugs are coming from the head unit. Fairly easy to route them to the right side compartment where I have stored the amp.

Very pleased, and very happy to have AVC back again! I feel like the signal is slightly stronger than the one going to the headsets, and I had to reduce the gain adjustment on the amp to get rid of the clipping/distortion. Overall I'm getting slightly more volume.

End of project! Hurray!