Tridium LED Fog/Running lights - Page 2
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Tridium LED Fog/Running lights

  1. #11
    Only US bikes come from the factory wired for fog light.

  2. #12
    Senior Member VStarRider's Avatar
    Join Date
    Oct 2015
    Location
    Penfield, NY
    Posts
    941
    Quote Originally Posted by Thommoperth View Post
    Hi
    I have one of these kits and upon trying to install it I find my 2013 is not fitted with the fog light plugs that are located near the horns. Nor is the connector under the radio controls fitted with a 4 pin plug, it only has 2 in it, unlike the pic attached. Any help or ideas would be appreciated thanksAttachment 5343
    If you are willing to do some cutting and soldering, you can still use the Tridium kit.
    Former Ride:
    2013 F6B Standard, black; sold 7/2019
    Latest Addition:
    2016 Gold Wing Level 3, red; SCT transmission stuck in manual mode
    2019 Miles:
    7,900 as of 10/6

  3. #13
    Senior Member Switchmonkey's Avatar
    Join Date
    Jul 2016
    Location
    Petawawa, ON
    Posts
    158
    Quote Originally Posted by Stone Laker View Post
    Only US bikes come from the factory wired for fog light.
    ...and Canada
    2016 F6B Matte Grey
    2016 XDiavel (Sadly...gone)
    2014 M109r (FHD Classic) (Sadly...gone)
    2014 VRSCF (Gone)
    2006 VTX 1300C (Gone)

    "I find as I get older that I have less and less to say about more and more. I thought I was mellowing as I got older, turns out I just don’t give a sh1t.”

  4. #14
    Junior Member
    Join Date
    Jun 2013
    Location
    Perth, Western Australia
    Posts
    11
    Quote Originally Posted by VStarRider View Post
    If you are willing to do some cutting and soldering, you can still use the Tridium kit.
    Yeah I know, will do that, just a pain in the butt. Am on it now, got the turn signals done and will do the fog/driving light next week.

    Thanks for the replys......

  5. #15
    Senior Member Switchmonkey's Avatar
    Join Date
    Jul 2016
    Location
    Petawawa, ON
    Posts
    158
    Quote Originally Posted by VStarRider View Post
    Question for you --- how did you stuff your wiring back in behind the mirror? I cannot seem to get all those wires back into that small space, especially with the Kury connector, without a lot of hairpin bends in the wires. This worries me for the long term. I am wonder if I should put in some of those ... ummm... what are they called ... keep the wires straight near the connectors ... wire looms?? Anyway, do you have any advice on how to get those wires back so they aren't so bent and may possible break down the road?
    I stuffed everything down the cowl side, and only have the one connector to mirror in the housing. Lots of room in there.
    2016 F6B Matte Grey
    2016 XDiavel (Sadly...gone)
    2014 M109r (FHD Classic) (Sadly...gone)
    2014 VRSCF (Gone)
    2006 VTX 1300C (Gone)

    "I find as I get older that I have less and less to say about more and more. I thought I was mellowing as I got older, turns out I just don’t give a sh1t.”

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •