F6B with ERGO II highway pegs
Results 1 to 9 of 9

Thread: F6B with ERGO II highway pegs

  1. #1
    Member cody13's Avatar
    Join Date
    Aug 2017
    Location
    florence, south carolina
    Posts
    47

    F6B with ERGO II highway pegs

    Has anyone installed the ERGO II on your FB6 ? Need to find out if the short peg allows your leg to get around the fairing and are you able to reach the peg?...thanks

  2. #2
    Member Spiff215's Avatar
    Join Date
    Feb 2016
    Location
    Leetonia Ohio
    Posts
    92
    I have them (32" inseam) & I don't have trouble with the fairing.

  3. #3
    Senior Member zeus661's Avatar
    Join Date
    Jun 2014
    Location
    Rossford, Ohio
    Posts
    472
    I have them and sometimes the sides of my calves will hit the fairing but its not anything to complain about.
    Former owner of a 99 Valkyrie for 15 years.

  4. #4
    Member
    Join Date
    Mar 2015
    Location
    Stoughton Wi
    Posts
    69

    Ergo II pegs

    Quote Originally Posted by cody13 View Post
    Has anyone installed the ERGO II on your FB6 ? Need to find out if the short peg allows your leg to get around the fairing and are you able to reach the peg?...thanks
    I have them on my B and think they are great. I have a 31" inseam and I use them in several ways. I like to push against them, straightening my legs and getting the bottom of my butt off the seat. With my legs braced and straight I am able to have the back of my butt against the low back support of the seat. I also just lay my feet over the top of them to straighten my legs out completely.

    I could not ride with out them.

    Hope that helps

  5. #5
    Senior Member JackB's Avatar
    Join Date
    Jun 2014
    Location
    Two Rivers Wi
    Posts
    949
    I also have the ERGO II with the 6 inch arms I have no problem hitting the faring. I use them all time would not for long ride without them.

  6. #6
    Member cody13's Avatar
    Join Date
    Aug 2017
    Location
    florence, south carolina
    Posts
    47
    My problem is they only come in the 2 inch style in black.....im afraid that will be to short...

  7. #7
    Junior Member
    Join Date
    Jul 2017
    Location
    Social Circle, Ga
    Posts
    6

    Ergo pegs

    Quote Originally Posted by cody13 View Post
    My problem is they only come in the 2 inch style in black.....im afraid that will be to short...
    Have them powder coated, I did mine and it only cost $20

  8. #8
    Senior Member Navvet's Avatar
    Join Date
    Jun 2014
    Location
    Stem, NC
    Posts
    357
    I have then and love them, but I have a 36"+ inseam ....


    2013 F6B
    2016 Spyder F3 Ltd

  9. #9
    Senior Member Switchmonkey's Avatar
    Join Date
    Jul 2016
    Location
    Petawawa, ON
    Posts
    158
    I have them in black and they are extended forward all the way. No problems with the fairing. I too am a 36"+ inseam. Those and a driver's backrest allow me to lay out like I'm on a sofa. It's a whole new ride! There is very little room to adjust for the difference on the engine guards between left and right. I got them so each is exactly the same distance from the stock pegs.
    2016 F6B Matte Grey
    2016 XDiavel (Sadly...gone)
    2014 M109r (FHD Classic) (Sadly...gone)
    2014 VRSCF (Gone)
    2006 VTX 1300C (Gone)

    "I find as I get older that I have less and less to say about more and more. I thought I was mellowing as I got older, turns out I just don’t give a sh1t.”

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •