Putting a smile on my face

[tenxxx]

I added hand wings to the mirrors and they work good or,,, not so good. The good. They keep wind off my hands which will be good in cold weather. But I can feel heat from the radiators when their closed. Not so good in warm weather. So you think I'll open them and get some air. Not so good either.
When their open, buffeting is BAD. So much that my eyes are jerky. Will have to play with them a bit to see if there's and in-between setting.
I made a thick (3mm) shim to disable the front anti dive. Much better ride now. While I had it apart, I check the function with front or rear brakes.
They are activated by the rear brake's only. And with an almost full press on the peddle. No action on the front brakes at all. Now that just don't make any sense? The valve was clean but the little piston would not return, keeping the shock locked up. There is a return spring in the receiving end of the unit but its not strong enough to push the piston back. Doesn't sound like Honda put a lot of thought into that. Ive been riding for 40 years without it on heavy bikes and never had a problem with front end diving causing braking issues. Got used to it I guess.
At any rate,, This is by far the best bike I have ever owned. At 65 years old, it will be my last.
Gonna ride till either I can't or the bike won't. Either way I'll be done.

[opas ride]

I added hand wings to the mirrors and they work good or,,, not so good. The good. They keep wind off my hands which will be good in cold weather. But I can feel heat from the radiators when their closed. Not so good in warm weather. So you think I'll open them and get some air. Not so good either.
When their open, buffeting is BAD. So much that my eyes are jerky. Will have to play with them a bit to see if there's and in-between setting.
I made a thick (3mm) shim to disable the front anti dive. Much better ride now. While I had it apart, I check the function with front or rear brakes.
They are activated by the rear brake's only. And with an almost full press on the peddle. No action on the front brakes at all. Now that just don't make any sense? The valve was clean but the little piston would not return, keeping the shock locked up. There is a return spring in the receiving end of the unit but its not strong enough to push the piston back. Doesn't sound like Honda put a lot of thought into that. Ive been riding for 40 years without it on heavy bikes and never had a problem with front end diving causing braking issues. Got used to it I guess.
At any rate,, This is by far the best bike I have ever owned. At 65 years old, it will be my last.
Gonna ride till either I can't or the bike won't. Either way I'll be done.

I said the same thing my friend at 65 that it would be my last bike...Now 4 bikes later and 78 years old, I am looking at the 2018 Goldwing...(Just a little)...Have my 2013 F6B set-up for me and really love the thing...Trying to decide whether or not to upgrade the front suspension and keep it, or trade for the new one...My wife has already said I have had enough bikes!!!.....Regards and ride safe

[Travelor]

I made a thick (3mm) shim to disable the front anti dive. Much better ride now. While I had it apart, I check the function with front or rear brakes.
They are activated by the rear brake's only. And with an almost full press on the peddle. No action on the front brakes at all. Now that just don't make any sense? The valve was clean but the little piston would not return, keeping the shock locked up. There is a return spring in the receiving end of the unit but its not strong enough to push the piston back. Doesn't sound like Honda put a lot of thought into that. Ive been riding for 40 years without it on heavy bikes and never had a problem with front end diving causing braking issues. Got used to it I guess.

This isn't quite correct. The anti-dive cylinder is indeed associated with the rear brake circuit, but will also actuate when the front brake is applied and the bike is moving. Applying just the front brake actuates one piston in the left caliper (and two on the right), causing the left caliper to rotate with the wheel movement and actuate the secondary master cylinder applying pressure to the anti-dive piston on the front of the fork leg.

[VStarRider]

I added hand wings to the mirrors and they work good or,,, not so good. The good. They keep wind off my hands which will be good in cold weather. But I can feel heat from the radiators when their closed. Not so good in warm weather. So you think I'll open them and get some air. Not so good either.
When their open, buffeting is BAD. So much that my eyes are jerky. Will have to play with them a bit to see if there's and in-between setting.
I made a thick (3mm) shim to disable the front anti dive. Much better ride now. While I had it apart, I check the function with front or rear brakes.
They are activated by the rear brake's only. And with an almost full press on the peddle. No action on the front brakes at all. Now that just don't make any sense? The valve was clean but the little piston would not return, keeping the shock locked up. There is a return spring in the receiving end of the unit but its not strong enough to push the piston back. Doesn't sound like Honda put a lot of thought into that. Ive been riding for 40 years without it on heavy bikes and never had a problem with front end diving causing braking issues. Got used to it I guess.
At any rate,, This is by far the best bike I have ever owned. At 65 years old, it will be my last.
Gonna ride till either I can't or the bike won't. Either way I'll be done.

I have issues with my Baker hand wings too. I must be screwing up on how they are assembled because the main bolt that threads into the bottom of the mirror keeps loosening up when I make adjustments. That is supposed to stay locked tight and only the bottom part is supposed to turn with the wing itself.

I have everything put together the way it the diagram shows. I have extra white plastic washers and I have tried using them and not using them. Still not right.