To Debadge the front
Page 1 of 2 12 LastLast
Results 1 to 10 of 30

Thread: To Debadge the front

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member FF-Ed's Avatar
    Join Date
    Jul 2014
    Location
    Portsmouth Ohio
    Posts
    198
    I got to "Man Up" and just go for it... that front and rear logo has got to go..
    [SIGPIC][/SIGPIC]
    2013 F6B Black
    Buell Lightning S1
    DR400sm
    Qlink Sumo

  2. #2
    Senior Member
    Join Date
    Jun 2014
    Location
    Largo, FL
    Posts
    2,662
    Got rid of my front and rear. Those things don't look bad IMO but they collect dirt and are hard to detail around.

  3. #3
    Senior Member FF-Ed's Avatar
    Join Date
    Jul 2014
    Location
    Portsmouth Ohio
    Posts
    198

    WARNING

    Using the wd40 and a piece of dental floss, I removed the Honda chrome logos quickly.

    The problem came with removing the remaining tape...

    goo gone, loosened it, I used a old super soft black cotton sock..

    (BIG MISTAKE) a little elbow grease

    40 minutes working on getting it off... and off came the sticky stuff.

    I rinsed the area off and let it dry... IT WAS SCRATCHED ALL TO HELL!

    my heart dropped all the way down to my ASS.

    OH NO, I nearly had a stroke.....

    well lets try to fix it,,, I got out a can of Meguiar's Cleaner wax and figured

    "it cant get much worse" I took the applicator pad and applied a light coat (worked it in, spiral pattern) & walked away.

    a hour later, I came back, this time with a clean micro fiber towel and buffed off the surface.

    it actually looked better, still scratched, but better... apply another coat, work it in, leave again...

    REPEAT about 6 more times.... 12 hours into this ordeal, the logos are off and the scratches are GONE!

    I must be the Luckiest SOB on this forum... My fairing and tail are shiny and badge free...

    and no paint color came off on my white micro fiber towel. I full expected to burn right thru my finish & figgured

    my next investment would be the paint shop... but I came out unscathed
    [SIGPIC][/SIGPIC]
    2013 F6B Black
    Buell Lightning S1
    DR400sm
    Qlink Sumo

  4. #4
    Senior Member SCMike's Avatar
    Join Date
    May 2014
    Location
    Inman, S.C.
    Posts
    105
    This discussion reminds me of the time, when I was in college, and my girlfriend borrowed my freshly painted car. She drove through an area where fresh tar had been laid and got little spots of tar all over the new paint. So she thoughtfully decided to clean it for me.

    She used steel wool pads to get the tar off. I am NOT kidding. There were little dull spots all over the car! She couldn't believe I was unhappy with her efforts.

  5. #5
    DarkSider#1617 Steve 0080's Avatar
    Join Date
    Dec 2012
    Location
    Sanford,FLA
    Posts
    8,079
    Quote Originally Posted by SCMike View Post
    This discussion reminds me of the time, when I was in college, and my girlfriend borrowed my freshly painted car. She drove through an area where fresh tar had been laid and got little spots of tar all over the new paint. So she thoughtfully decided to clean it for me.

    She used steel wool pads to get the tar off. I am NOT kidding. There were little dull spots all over the car! She couldn't believe I was unhappy with her efforts.
    At least she tried and did not try to hide it... +++
    " Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com

  6. #6
    Don't mess with my 'pepper' Scotrod's Avatar
    Join Date
    Jul 2013
    Location
    Houston Tejas
    Posts
    2,752
    Quote Originally Posted by SCMike View Post
    This discussion reminds me of the time, when I was in college, and my girlfriend borrowed my freshly painted car. She drove through an area where fresh tar had been laid and got little spots of tar all over the new paint. So she thoughtfully decided to clean it for me.

    She used steel wool pads to get the tar off. I am NOT kidding. There were little dull spots all over the car! She couldn't believe I was unhappy with her efforts.
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAARGH!!!!!






  7. #7
    Don't mess with my 'pepper' Scotrod's Avatar
    Join Date
    Jul 2013
    Location
    Houston Tejas
    Posts
    2,752
    Soak a soft cloth in Mineral Spirits. Blot glue and/or leave cloth on glue. (Try to keep the glue ~moist~ w/ MS)

    Wait. Wait. Wait.

    Let the MS slowly soften the glue.

    Wait. (Yes, I said it's slow)

    Use a MS-soaked Microfiber to VERY GENTLY ROLL the glue off. Comes off in little 'balls',,

    Let the solvent (slowly) do the work, NOT YOUR ARM!

  8. #8
    Senior Member
    Join Date
    Dec 2013
    Location
    Belleville IL
    Posts
    268
    I had good luck with Orange Glo furniture polish as well as PB Blaster penetrating oil, I used both at different times to remove the glue from debadging.

  9. #9
    Junior Member winginitrick's Avatar
    Join Date
    Mar 2014
    Location
    batavia ohio
    Posts
    6
    Quote Originally Posted by FF-Ed View Post
    I got to "Man Up" and just go for it... that front and rear logo has got to go..
    hey portsmouth! right up 32 west in batavia here. down by the OLD ford plant. yall keep on winginit rick
    do you know what it means to, walk alone? do you know what it means to, walk by yourself? do you know how it feels TO LOVE A WOMAN YOU CANT HAVE? THEN, YOU KNOW THE MEANING OF THE BLUES!!!!!!! joe bonnamassa

  10. #10
    Moderator Hornblower's Avatar
    Join Date
    May 2013
    Location
    Clemmons, NC
    Posts
    2,122

    Decepticon Badge

    OK...now, that you've debadged the front, what about a nice Decepticon emblem ? Steve 0080, I'm pretty sure you can get these in chrome

    Check it out:

    http://www.ebay.com/sch/i.html?_from...mblem&_sacat=0
    Ken (Hornblower)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •