Question about madsad

[ReserveBum]

I've gotten quite used to the looks of mine, but then again, I'm more about function than looks (which is probably why I'm okay with my beads on my seat).

While I understand that they're not a sponsor of the site, they do make a great product. I'll happily to refer to them by synonyms to avoid making anyone on the site upset, though. That said, I don't think the tire and oil companies we discuss with such vigor are sponsors either...and we use their names.

Spot on. I also have that shield and its been great. I have the 11" light tint (5'10" - 30" inseam). I have it adjusted up all the way and angled mostly straight up. I have a Corbin so I sit a little lower than stock but usually ride with beads or airhawk so probably a wash. The top of the screen aligns with mid nose so I see mostly over the top, otherwise the screen is light enough for good viewing. I ride with a full face but leave the visor open and i get a very gentle airflow around my face even at highway speeds. Functional Beauty.

[Ewreck]

Spot on. I also have that shield and its been great. I have the 11" light tint (5'10" - 30" inseam). I have it adjusted up all the way and angled mostly straight up. I have a Corbin so I sit a little lower than stock but usually ride with beads or airhawk so probably a wash. The top of the screen aligns with mid nose so I see mostly over the top, otherwise the screen is light enough for good viewing. I ride with a full face but leave the visor open and i get a very gentle airflow around my face even at highway speeds. Functional Beauty.

I just noticed your avatar is a Freewing F4. Do you fly RC? I just got back into it after a 10 year hiatus. Picked up a 90mm Venom but it will stay in the shop after I build it until I get the rust off. Not sure how an EDF will do at 5000’ but it was to cool to pass up.

[ReserveBum]

I just noticed your avatar is a Freewing F4. Do you fly RC? I just got back into it after a 10 year hiatus. Picked up a 90mm Venom but it will stay in the shop after I build it until I get the rust off. Not sure how an EDF will do at 5000’ but it was to cool to pass up.

Not into the RC, it was the best picture of an F4 I could find.

[Ewreck]

Not into the RC, it was the best picture of an F4 I could find.

Top 5 jets of all time.

[JWExperience]

Top 5 jets of all time.

you mean real jets or RC?

[Ewreck]

you mean real jets or RC?

Real

[edgeman55]

I just noticed your avatar is a Freewing F4. Do you fly RC? I just got back into it after a 10 year hiatus. Picked up a 90mm Venom but it will stay in the shop after I build it until I get the rust off. Not sure how an EDF will do at 5000’ but it was to cool to pass up.

That 90mm will fly fine at 5000ft elevation.I have been flying RC for 40 years mostly large scale aerobatic planes with gas engines.Last year I got into EDF's and I love it.I have a Freewing 90mm Stinger,80mm Avanti and a 70mm Yak.All fly well at my 4800 ft elevation.The Avanti is a great first EDF jet-almost flys itself.Only drawback is the 3.5 minute flight times.Just remember at your elevation your sink rate is high and with a EDF you must fly it to the ground.
As far as the Madsad I am 6'4" with a 32inch inseam on the stock seat.I have the 15" screen and set to the middle I just look over the top and it works GREAT.Best windscreen I have been behind in 50 years of riding.

[Ewreck]

That 90mm will fly fine at 5000ft elevation.I have been flying RC for 40 years mostly large scale aerobatic planes with gas engines.Last year I got into EDF's and I love it.I have a Freewing 90mm Stinger,80mm Avanti and a 70mm Yak.All fly well at my 4800 ft elevation.The Avanti is a great first EDF jet-almost flys itself.Only drawback is the 3.5 minute flight times.Just remember at your elevation your sink rate is high and with a EDF you must fly it to the ground.
As far as the Madsad I am 6'4" with a 32inch inseam on the stock seat.I have the 15" screen and set to the middle I just look over the top and it works GREAT.Best windscreen I have been behind in 50 years of riding.

Thanks for the info. I can already tell these planes are going to cut into my firearm purchases.