On the bolt that holds the tag light! Just a cheap hurricane hanger that I drilled a hole into.
On the bolt that holds the tag light! Just a cheap hurricane hanger that I drilled a hole into.
" Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com
Noted! Thanks...Originally Posted by Steve 0080
21 years Army (retired)
...been everywhere, seen everything, done almost everything.
IBA 80537
My Bat Man light has a new owner!
" Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com
Steve, did you do anything special to keep the rear wheel from throwing debris/road spray on the lens of the laser... as it was installed inside of the back of the read fender area? Or am I misunderstanding the point where you actually mounted it?
If inside of the rear fender area, I'm thinking that there needs to be some sort of deflector installed to keep it from being pummeled by rear tire debris?
21 years Army (retired)
...been everywhere, seen everything, done almost everything.
IBA 80537
Never had an issue with debris, water on the other hand, atleast the one I owned was a no no. If riding in the rain I just took power away from the light and plunged it back in when dry.
To answer other questions, it is best to buy the light, put power to it and see how it works. Then go about mounting it. Its easy once you have it in hand!
" Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com
Thanks Steve! I think I am going to waterproof the entire unit with a sort of epoxy, or another method.
I did play with it over the weekend too...!the "Punisher" image projected on the ground is amazingly sharp and clear. And you don't have to raise it very high either, to get a nice footprint of it behind the bike.
21 years Army (retired)
...been everywhere, seen everything, done almost everything.
IBA 80537
Just received the Punisher badges that go over the round Honda side badges. The install was simple. They look like they will hold up nicely. This really sets off the bike. Thanks Wiltil.
You're welcome.Sometimes "cheap" is actually good
21 years Army (retired)
...been everywhere, seen everything, done almost everything.
IBA 80537
Posting Permissions
Reply With Quote