Rough Ride
Results 1 to 10 of 10

Thread: Rough Ride

  1. #1
    Senior Member
    Join Date
    May 2013
    Posts
    119

    Rough Ride

    I did some riding yesterday on rough roads, not off road just roads with bumps. I found the f6 quite harsh for most of the ride(was riding two up) is this normal? Tires 40/40.
    Will a trax shocks improve the ride or just the handling?

    Richie

  2. #2
    Senior Member bobbyf6b's Avatar
    Join Date
    Jun 2013
    Location
    Arizona
    Posts
    2,482
    Was it bottoming out? You might want to add pre-load to the shock. There's an adjuster behind the right side panel under the seat.

  3. #3
    Senior Member Texas TC's Avatar
    Join Date
    May 2013
    Location
    Corinth, Texas
    Posts
    687
    40/40 tire pressure will extend the life of the tires. Conversely, it provides for a rough ride. Personally, I will live with a bit more feel of the road to extend the lfe of my tires. Your choice.
    [SIGPIC][/SIGPIC]

  4. #4
    DarkSider#1617 Steve 0080's Avatar
    Join Date
    Dec 2012
    Location
    Sanford,FLA
    Posts
    8,079

    Cool

    Yep !! I'll bet your rear shock is on full hard....move it till there are 4 lines showing and try that....you have to open the saddle bag to get the side cover off.....roll shock off till 4 lines is showing....good luck !!!
    " Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com

  5. #5
    Senior Member bobbyf6b's Avatar
    Join Date
    Jun 2013
    Location
    Arizona
    Posts
    2,482
    I believe they all come stock on the softest setting (mine did). More pre-load needs to be added so it doesn't bottom out.

  6. #6
    Senior Member michaels's Avatar
    Join Date
    Jun 2013
    Location
    Denison Tx
    Posts
    107

    Handlebars

    Coming from a Yamaha FJR i notice the firmness of the ride comes the the long length of the handle bars...where i didnt notice it on the FJR on the same roads.

  7. #7
    Member ddoug's Avatar
    Join Date
    May 2013
    Location
    Pipe Creek , Tx.
    Posts
    78
    Wife and I just finished a 3974 mile trip over many types of road surface. I ended up 4 clicks from full soft, to prevent any bottoming out ; which my wife absolutely hates when it happens. We weigh 330lbs together ;plus about 30 lbs of gear.

  8. #8
    Senior Member
    Join Date
    May 2013
    Posts
    119
    Thanks for all the help............Richie

  9. #9

    REAR SHOCK

    Quote Originally Posted by Richie View Post
    Thanks for all the help............Richie
    I had the same problem with my rear shock, the f6b runs a stiffer spring then the pre 2012 goldwings. but it is not stiff enough for me. called progressive they said the goldwing spring will not fit. so i ordered one to see why it would not work.. well it will bolt wright on and is stiffer then the stock spring. it works very good now with half preload. the only thing is you have to pull the fuel tank, and have the progressive tool to remove the old spring. we do these all the time, it takes about 2.6 hours to do, but you need to run the fuel level low to make removal of the tank easier. the progressive spring has a larger wire size. dale

  10. #10
    Senior Member timjoebob's Avatar
    Join Date
    May 2013
    Location
    Shenandoah Valley, VA
    Posts
    203
    I'm finding my ride a bit rough, too. But I believe my front shock is quite firm because I'm feeling a "bouncing" feeling up front on irregular pavement. My rear shock is set nearly to the softest setting, so I'm gonna firm it up to see if that helps.
    -Tim
    2009 BMW R1200RT
    2013 Honda F6B HR Signature Series (born 7/17/13; sold 6/25/16)
    2011 AB Trailer
    2005 Honda GL1800 Portland Gray Metallic (Gone), 2005 Honda VTX 1300R (Gone), 2004 Honda Shadow Aero 750 (Gone)
    Darksider #858: Kumho Ecsta 195/55/16 with Dynabeads/Dunlop E3
    IBA #47379
    GWRRA


    [SIGPIC][/SIGPIC]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •