I got it off with no problems now to get the seat back on...?
Any videos or help on this one?
I got it off with no problems now to get the seat back on...?
Any videos or help on this one?
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2015 F6B owner (purchased new 10/29/16)
Traded in my 2014 CTX 1300
Sold my 1995 Nighthawk
Sold (1st bike) Kawasaki Vulcan 500
Are the bolt holes not aligning?
You've got the front tab to tuck under and then the bolts to align.
What isn't working?
My girls:
Isleen - 2014 F6BD
Saorla - 1995 FLSTN Heritage Special
"Politeness, n: The most acceptable hypocrisy."
Ambrose Bierce
We got it now... they were not lining up. Had to call in the expert (my wife) to help.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2015 F6B owner (purchased new 10/29/16)
Traded in my 2014 CTX 1300
Sold my 1995 Nighthawk
Sold (1st bike) Kawasaki Vulcan 500
Had to call in the expert on "pins aligning with holes"....
I just love what you young people are calling it these days.
Good on you both!
Lol....
Cheers,
Steve
My girls:
Isleen - 2014 F6BD
Saorla - 1995 FLSTN Heritage Special
"Politeness, n: The most acceptable hypocrisy."
Ambrose Bierce
Next time use 4 Phillips round body screw drivers to get you started....The drivers will "hunt" the hole then just pull one at a time and insert bolt. You can also thread on a nut and grind the bolt to a point or at least sharper than blunt this will also help hunt the hole !!!
" Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com
Next time you remove the seat take the opportunity to clean out the Frame Seat Boss Threads. Unfortunately Mother Honda allowed "powder coat overspray" to enter the threaded holes during manufacturing.
Here's the scoop on the Improvement!
http://hondaf6b.com/showthread.php?3...on-Improvement